Bussmann Series UL 98 and UL 508 Disconnect Switches
Bussmann Series UL 98 and UL 508 Disconnect Switches is a fused or non-fused disconnect used to isolate a circuit for service. Select the catalog number for the required voltage, current and interrupting rating. It is used for industrial plants.
Match the replacement to the same class, voltage and interrupting rating. IEC EN (CE), NEC NEMA ANSI (UL、ETL), (CSA) is the standard family buyers should confirm on the datasheet before installation. Common series references include UL 98 and UL 508 Disconnect Switches.
GODZ is an authorized Eaton Bussmann distributor. Send the catalog number, quantity and application and we will confirm availability, cross-reference and lead time.
Bussmann Series UL 98 and UL 508 Disconnect Switches gives maintenance and design teams a direct answer on where the device fits: a fused or non-fused disconnect used to isolate a circuit for service. Use it when the circuit needs industrial plants and the installed gear is already laid out for this family.
Core Features
- Built for industrial plants
- Ratings are defined by catalog number, not by a single amp value
- Standards to confirm: IEC EN (CE), NEC NEMA ANSI (UL、ETL), (CSA)
- Physical size or rejection feature reduces the chance of installing the wrong class
- Genuine Eaton Bussmann supply with traceable authorization
Benefits
Specifying the correct Bussmann Series UL 98 and UL 508 Disconnect Switches keeps the original voltage and interrupting rating in the circuit after a fuse or device is replaced. That shortens fault clearing, limits let-through energy, and avoids a shutdown that spreads past the failed branch.
Holders, blocks and rejection clips in the same family only accept the matching case size, so a later replacement cannot silently downgrade the protection.
Fuseology
An overcurrent device is the intentional weak point in the circuit. Under a sustained overload or a short circuit it opens, and the rest of the system stays within the rating of the cable and equipment. For Bussmann Series UL 98 and UL 508 Disconnect Switches, check three items before ordering: voltage, current, and the interrupting or surge rating of the exact catalog number. Time-delay versions ride through motor inrush. High-speed versions clear semiconductor faults before the device is damaged.
| Product family | Bussmann Series UL 98 and UL 508 Disconnect Switches |
| Series references | UL 98 and UL 508 Disconnect Switches |
| Rated voltage | See catalog number |
| Rated current | See catalog number |
| Standards | IEC EN (CE), NEC NEMA ANSI (UL、ETL), (CSA) |
| Typical application | industrial plants |
| Operating class | See datasheet |
| Supply | Genuine Eaton Bussmann |
Industry Solutions Built Around Your Application
Industrial Motors and Drives
High-speed semiconductor fuses, ferrule and square-body fuses, and the disconnect that isolates the drive.
EV Charging
Fuses for the DC link inside a charging post, published up to 1000 Vdc, plus the contactor that switches that bus.
Energy Storage
DC fuses for battery racks, inverters, and the DC bus in a storage system, with published ratings up to 1500 Vdc.
Questions About Bussmann Series UL 98 and UL 508 Disconnect Switches
Bussmann Series UL 98 and UL 508 Disconnect Switches is a fused or non-fused disconnect used to isolate a circuit for service. Typical applications include industrial plants.
Match voltage, current and interrupting rating. For this family, start from the voltage and current printed on the catalog number and confirm the exact catalog number. Applicable standards: IEC EN (CE), NEC NEMA ANSI (UL、ETL), (CSA).
Yes. Send the existing part number, voltage, current and a photo of the label. We will cross-reference it to a genuine Eaton Bussmann catalog number in the same class.
Send the catalog number, quantity, and whether you need a holder, indicator or accessory with the device. Bulk BOM inquiries are welcome.


